MatterHackers PRO Series Ryno filament Unboxing/first impressions

2,283
0
Published 2017-07-27
THIS IS NOT A PAID PROMOTION! But MatterHackers Customer Support is AMAZING! This is just something I wanted to do to get info out there for everyone. Note: The layer adhesion issues were my fault not the filament. I had the temperature set too low with thick layers. I have done a few more prints and layer adhesion is perfect. Supports also remove really easily.
I know this is another random upload but I figured I'd cover this stuff since I couldn't find any videos on it. This stuff turned out pretty good. I printed these test pieces on my Hictop/Creality CR-10.

www.matterhackers.com/store/l/black-pro-series-ryn…

All Comments (9)
  • Kind of new to this but what kind of settings were using temperatures? Also how fast were you printing? I know there’s not a lot of information out there about this but it looks like an interesting film it
  • @BennyTygohome
    Is this considered an abrasive filament? Does it require a hardened steel nozzle like filaments such as nylonx or carbon fiber would? Thank you.
  • @x9x9x9x9x9
    Sorry its not the best video but at least its something covering the filament. I might make an actual review in the future once I have more experience with this filament.
  • I used the recommended 60-65 bed temp and it curled up like I was printing ABS. Frustrating filament.