Using a biscuit joiner! | PLANS AVAILABLE
7,582
Published 2023-12-01
Check out the plans on my Etsy shop!
www.etsy.com/listing/1651555466/night-stand-plans?…
VIDEO/ CHANNEL REFERENCES
@bentswoodworking Vertical Panels • You're overthinking it
@KeithsTestGarage Wicked Fast Shop Drawers • Wicked Fast Shop Drawers (Offsets & B...
MATERIALS
- 3/4" maple veneer plywood
- 1x4 maple board
- Maple Tapered Leg: www.rockler.com/6-tapered-turned-leg-hard-maple
- Tapered Leg Bracket: amzn.to/48LgGCp
- 16" Drawer Slides: amzn.to/42fNIbK
- Drawer Handles: amzn.to/3Hv7xC6
- Titebond II: amzn.to/3Hv7xC6
- Brad nails
- Rustic Lumber Furniture Oil (affiliate): rusticlumberstore.com/collections/rustic-lumber-oi…
TOOLS (links are affiliate)
- Makita Track Saw amzn.to/4ahrIR6
- DeWalt Biscuit Joiner amzn.to/46RuWb6
- Bosch Router amzn.to/46Qzler
- Sander
- Brad Nailer
- Drill
- Clamps
0:00 Intro
0:17 Break down plywood
1:40 Cut edgebanding
2:33 Apply edgebanding
3:47 Trim Edgebanding
4:52 Sanding
5:16 Cut biscuits and dry assemble
6:46 Glue
8:06 Sand dowels
8:34 Assemble drawers
10:13 Cut faces
10:52 Route all edges
11:21 Install hardware
14:23 Apply Finish
15:48 Final Sand
16:13 Done
All Comments (11)
-
Nice idea with the slot. Tablet, book, tall stuff that always get put on the floor.
-
Very nice execution. I like the design. I probably would have made one a mirror image of the other, but otherwise I like the look of it.
-
Nice! Reminds me of how my dad made many of his kitchen cabinets and different furniture such as tv stand cabinets. Really solid construction that goes together quickly as well. I like the shop setup, I've never used a track saw but it really does look like it replaces a table saw and chop saw.
-
Super build. I like the video explaining all progress. Well done.
-
Did you think about mirroring the design so they would look like a set when placed on either side of the bed?
-
Nice build. Did you have a specific item in mind to store on the side shelf when you designed the nightstand?
-
Very nice mate 😊😊
-
Do you have plans available? Great build!!
-
what's the deal with the one rough cut leg?
-
RIP bench top. 😮