DeWalt 60 Gallon Air compressor. Purchase, install and 1st power up.
33,426
Publicado 2021-02-15
Todos los comentarios (21)
-
GO PACK GO!!! Good video bro. Thanks for the explanation
-
Northwoods congrats on the new compressor. It looks like the one at TSH I'm thinking of buying. About your regulator setup. it is recommended to use a flex (whip) hose from your tank to the rigidly mounted regulator. It's suppose absorb vibration from the A.C. to the Reg. Prevent leaks down the road. A ball valve, then flex hose, then regulator. Don't take this as a critique but more of a warning. The wiring from the A.C. to the receptacle is very unsafe. SO cord, which is flexible should be used instead of Romex when utilizing a plug, instead of hard wiring to a box. It also provides better conductor insulation . Example: You have an " uninsulated Ground" (Green) running between two hot legs of the 220 connections in the plug assembly. Romex's Ground is uninsulated. SO cord provides insulation on the ground Green) conductor. Hate to see ya get hurt or burn down your shop!
-
I have the same compressor and I really thought that you was going to help us on how to install the fittings too. 😔 Great video btw.
-
Likd your truck too. Great video.
-
Looks good .
-
Good review
-
sweet video thanks dude
-
I was watching the video and you are not showing the operation or the pressures. What are the cutout and cutin pressures set for the factory?
-
Solid pipe from tank to dryer bolted solid to the wall , with the compressor vibration something has to give , needs some kind of flexibility between the two
-
Hey I just got that same compressor, just wondering what kind of deal did you get on that I just bought mine yesterday on a deal and paid 599.99 before taxes. Haven't hooked mine up yet need the 240 plug lucky my Dad was an electrician in the Navy for over 20 years. Like the video thanks for sharing God Bless and have a good one.
-
How did you put the off n auto cover back on? I had a time getting it to line up with that white thing that goes in the pressure switch and today it jumped off n it won't go back on right, I have tried ever way possible n when I turn the white thing the compressor doesn't start up. Thanks!
-
Some people use hose coming out of the tank leaving enough hose in a loop not kinked then to regulator. The compressor should be anchored to the floor. They do sell a drain hose to run from bottom of tank with a shut off. Also after running it for 20 min. the compressor oil should be changed for break in.
-
Can you go into detail about the WD40 and how to do that
-
Sounds like my friend Bitto poured the concrete floor. Is this compressor 3 or 5 horse power? What was the price? Thanks.
-
Can i wire is from direct 230v or i need two hot wires from 120v. Please need to know
-
What regulator did you use. By going from 3/4 to 1/2 does that lower your cfm or flow just got it today and trying to order buy everything i need 😳
-
I’m I good if I pick it up in my dads van and have it laying down for like 20 mins. Drive idk if the oil will affect annoying
-
Just got a 60 gallon working on lowering the db
-
What size is the tube to connect bowl filter 3/8 or 1/2
-
I bought the same compressor from tractor supply on sell for $527 about a month ago