Don't make these resin mixing mistakes!
82,140
Published 2023-04-20
Like my videos? Send a SUPER THANKS so I can buy more craft supplies!
--------- Tools I use (affiliate links) ----------
Heat gun: amzn.to/3IWBaxt
Gloves: amzn.to/3qr5Zno
Resin: artnglow.refr.cc/lydiad
Respirator mask: bit.ly/3OWxT58
Silicone Mat: amzn.to/3gb2zKw
Mixing Cups: amzn.to/2Q2FL5e
Whether you're a beginner or have some experience with resin, I'll cover all the basics and give you some tips and tricks along the way.
I start by discussing the different types of epoxy resin and the materials you'll need for mixing. I'll then demonstrate how to measure and mix the resin and hardener and explain why it's important to follow the correct mixing ratios.
Next, I'll cover some common mistakes to avoid, such as overmixing or undermixing the resin, and how to avoid bubbles and other issues. I'll also cover how to properly cure the resin.
Whether you're working on a DIY project, crafting, or woodworking, learning how to mix epoxy resin properly is essential for achieving professional results. So, join me in this tutorial and get ready to create stunning pieces with epoxy resin.
Want more resin tutorials?
Here's the full YouTube series: • Resin Crafting Tutorial Series
The mixing stage of resin crafting is where most people go wrong.
In this video I'll show you how to avoid a lot of the common issues with mixing and curing your resin.
DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support, I truly appreciate it!
Resin: artnglow.refr.cc/lydiad
Respirator mask: bit.ly/3OWxT58
Silicone Mat: amzn.to/3gb2zKw
Mixing Cups: amzn.to/2Q2FL5e
----------------------------------------------------
R E C O R D I N G G E A R
Ring Light: amzn.to/2JsERd5
Soft Boxes: amzn.to/2I0xmdV
Camera: amzn.to/34dIgda
Tripod: amzn.to/2YaTQlp
----------------- S T A Y C O N N E C T E D ------------------
www.clevergirlscraft.com
IG: @CleverGirlsCraft
All Comments (21)
-
What resin mixing questions do you have? I'd love to help if I can!
-
Thank you for this tutorial. I’d heard about epoxy, but never used it. I learned a lot!👍🏽
-
Thank you for this video. It's very helpful.
-
Thanks!! Bless from CHILE 💖🇨🇱
-
just take a blow torch through it lighter to the air bubbles takes it out less than 20 seconds you got clear resin don’t wait just take a torch to it Call it a day it’s safe it’s affective it works, I don’t have to put it in a mole you can use the torch after you’re done stirring take the torch do it a couple times it’s not gonna hurt anything and you’re not gonna have any air bubbles. once you transfer that into the mold you’re set.
-
Very informative ❤ I appreciate the clear examples and detailed explanation, my resin usually gets milky/stringy and I even heard on YT before that if it's milky it's correctly mixed and done. 😂 I have been very discouraged lately because of my last batch. Literally made it hard to come back to, ended up bendy. Way later I found out I can just coat it with resin itself and fix it but haven't got around doing it because again, so discouraged 😩 I am definitely still a beginner and glad I stumbled upon this!
-
Thank you so much for making this video I am new to using a epoxy resin. I used some for the very first time yesterday, and my epoxy was cloudy. I was wondering what I was doing wron, but after watching your video. It's because it was just old. I had ordered new apoxy that I will be using. For my Tumbler, but I'm very happy. I came across your video so very educational. I thank you so much for making this.
-
Thank you for these tips.
-
What a helpful video! I have struggled with epoxy resin and UV resins for quite some time now. I've watched so many tutorials, but yours is the most helpful. So what happens when you've followed all the instructions and your resin still comes out with blemishes? These little fine line cracks I want to call them? I have ruined so many pieces and I have given up faith that I will ever try resin again. I appreciate you!
-
Use Saran wrap under the screw top.
-
Thank you Clever Crafting Girls!! I sub, and liked. For your Voiceing your tutorial, and the explanation, and feedback. Thank you!
-
Important point not to stir it very fast when mixing. In many video tutorials, they use an electric hand blender to mix the resin with the hardener or to mix in colors. But this makes the resin full of air.
-
very helpful thank you
-
Thank you! 💖
-
See what you're saying probably why I made mistakes first time really didn't have enough go round to it but good to know probably was nervous first time went stir it too fast saw bubble on it
-
Can you stir resin to long? When resin starts to harden can you add new resin to it, so as not to waste
-
I used uv resin and add powder pigment ,it dry on top underneath was a flop 😔 please tell me what did i do wrong....I was making keyrings and bookmarks 🙆♀️🥺
-
Thank you for your video and suggestions. I’m new to using resin and feel like I’ve followed all instructions: 1:1 ratio, 75 degree room, low humidity, mix for 5 minutes, etc. I’ve done 3 pieces (free form bowls) and they are all still very bendy even after several days. I’ll give it more time but it seems like they should be fully cured/hard at this point. I did use alcohol ink but not overpowering amount. Any suggestions?
-
I have just did my first resin mix and mine was the right one, I'm so disheartened, but will try again
-
Thanks, the temperature thing I faced and didn’t know how the cause of it. (Seen someone use a jug with a push thing to pour resin, does that count as air tight?)
