Harbor Freight Apache 4800 Pistol Case Club Foam Insert

A lot of money but looks so much easier than picknpluck foam

They have a video on the site that explains what the different inserts do and how to adjust for bigger versus smaller guns.

I have this case and foam and it is great. That slot in the middle that you found is for your desiccant. Look around should be a small little metal desiccant case. If you can't find it contact the seller and they will probably send one to you. I can tell you from experience if you have 6 guns loaded in this case with 21 mags plus another 6 mags in the guns for a total 27 loaded mags, that case will weigh a ton! And Lord forbid you have a bunch of steel guns in there like I do sometimes it makes for a very heavy case.

Looks like a hell of a case Thanks for sharing Have a nice day

For $60 looks like a great deal !

Seems you don't know the trigger down Glock storage trick. If the trigger is stored down (in the pressed not reset position), you won't have to check if it's loaded. FYI

Jim, put all pieces back in. Paint top with your favorite color. Then pull out pieces. Much better look.

Was this also purchased at harbor freight I couldn’t find, said they didn’t carry this item

Will that hard foam scuff the finish on your guns?

Where do you buy those foam inserts?

The foam insert is not on their website. I bought the case a few weeks ago and I did a pretty good job with the “pick n pluck” foam but it would be nice to have an additional configuration. Especially if the pieces are replaceable. Unlike the pick n pluck

To expensive for foam. Costs mord than case did.

Currently unavailable. Wah wah, your video must have sold them out.

Of course it's out of stock now

Dang the foam costs more than the case itself.

The foam is as expensive if not more than the case at Harbor Freight so…..

Try reading the instructions BEFORE you start recording. Or better yet, watch the Case Club video where the nice young lady shows exactly where you're struggling here. Would make for much better content. Edit: Please, please go watch the Case Club video so you can properly set up your case... watching you guess and struggle is not helping anything.

Not very good at puzzles are you😅. Kidding, nice for the $

Will that hard foam scuff the finish on your guns?