Fixing a dented Auger
27,394
Published 2024-07-03
All Comments (21)
-
I enjoy your humour regarding your joke that you don’t know what you are doing about fixing dent in auger when in fact your knowledge regarding repairs is extensive in a very skillful manner.
-
Andrew is growing up fast. It's noticeable that the little fella is getting bigger. He's a good worker too.
-
You are adding body work to what has to be done on the farm 👍🚜
-
Andy if I didn't know better i would say that Nathan was your son. I've been watching your videos for several years and it seems like Nathan is your go to employee he's a hard worker and looks like he's a good mechanic. Good help is hard to find in this day and age. Stay safe.🍻🍻
-
That's pretty ingenious fixing Andy. Nice job.
-
Nice work! Just a little paintless dent repair. Sounds like the driver owes the shop fridge a case of beer.
-
Very impressive family dairy operation. The Hourigan family legacy lives on in documentation. I looked up the late Mrs. Hourigan on Find A Grave. She sure lived a long and profound life.
-
Another good one Andy Y'all have a HAPPY 4th of July 🇺🇲 🚜🐄👍
-
Have a good 4th Andy if you can find time 4 it 😊😊
-
Darn, Andy she's almost better then new....didn't surprise me a bit 👍👍🍻
-
I knew you had it fixed before you even started working on it. The funny part was! When you said that you didn't have any ideal what you was doing. You had it right from the get go!!!
-
Another very interesting video Thank you Andy 😊😊😊😊
-
I've done this trick before, never fun working on augers in my opinion. For someone that doesn't "know what he's doing", you sure do know what you're doing, don't care what anyone says Andy. Great video as always, cheers :)
-
Maybe a good idea to weld on a couple small bolts for studs along the bottom of the auger and use them to bolt in a piece of aluminum reinforcement under the auger to help keep it from being dented again? Happy 4th Andy !
-
Hi Andy ! Good job ! Thanks Andy for your time and everybody have a good day at the farm ! 🙋♂️
-
I usually weld a piece of chain to the tube heat it and pull it with a come a long and just leave the link welded on if it's no going to be in the way
-
Great repair job guys
-
Thank you for another Great video. Cheers
-
Neat little trick to pull a dent out. Expected one of those pull hammer thingies.
-
I have been going back & watching some of your older videos & it blows my mind the capital investment in equipment required to spread on the fields the volume of manure your dairy operation produces.
