How to clean a clogged printer cartridge. DIY printer cartridge

Boht achi information di ...tnx bro teri bjh se mene 2 cartridges theek kr di ghar pr hi

Never take the covers off. I fallowed a refill video that showed that method and every time I tried to print something after using that cartridge I would need to refill it before I started. It is the same as leaving the cover off a marker. If the covers come off you need to have a way to reattach them so that they remain perfectly sealed as they were before you removed them. A couple of dabs of crazy glue on the sides won't cut it. The old glue needs to be filed off bot the cover and the base, and something I have yet to discover needs to be used to reattach the cover to the base in a way that it is perfectly sealed.

Thank you for this tutorial which made me understand a lot of things. I had refilled an empty print head (HP 62XL) with ink from a new cartridge that did not work. Unfortunately, it didn't print anything at all. I tried many methods, cleaning the heads by the printer, soaking in hot water, in alcohol, nothing worked. Out of curiosity I put my mouth on the print head and sucked gently. At first, nothing came. Then something came out and I rinsed my lips and put my cartridge back in the printer and started printing right away: it was perfect.

Thank you so much sir, this video proved very very helpful for me. Thanks alot. May God bless you 🙏 you don't know by doing this you are helping Many people

Always use your printer to avoid ink drying on nozzle or clogging. At least every other day. Print a very small CMYK Bar so that all ink color are used to make it always wet. Leaving your printer off for how many days can cause ink drying that leads to printer head nozzle clogging.

Interesting, that is a deep clean. I usually take the print head off and soake the tip of the print head in warm to hot water for 2-3 minutes to break down any dried ink in the port jets. This works for me, but this is an alternative.

I tried all other methods like steaming and soaking in hotwater, cleaning with earbuds, tissues, Alcohol based cleaner etc.. nothing worked for me.. finally I tried this as a last resort before almost decided to buy new cartridge.. surprisingly this thing actually worked and I used shoefixer to glue it back in place

Bro spent his whole day to save 20$ great job bro 👏

No gloves? Crazy. Surely just put some new ink in through the hole on the top get suction kit and suck blockage out

Merci pour ce tuto qui m'a fait comprendre plein de choses. J'avais rechargé une tête d'impression vide (HP 62XL) avec l'encre d'une cartouche neuve qui ne fonctionnait pas. Hélas cela n'imprimait rien du tout. J'ai essayé plein de méthodes, nettoyage des têtes par l'imprimante, trempage dans l'eau chaude, dans l'alcool à 90, rien n'a fonctionné. Par curiosité j'ai mis ma bouche sur la tête d'impression et j'ai aspiré doucement. Au début, rien n'est venu. Puis quelque chose s'est débloqué et je me suis rincé les lèvres et j'ai remis ma cartouche dans l'imprimante et lancé tout de suite une impression : c'était parfait.

Thank you so much... Now it's working very well.....

apne jo ink dia cartridge me oh ink ki normal print wala black print?

5:03 Why am i laughing so bad 😂

De todas formas no se corrigió el problema. El problema estaba en las boquillas, no había la necesidad de abrir y lavar el cartucho, además el thiner puede dañar el cartucho o sus componentes. Si se hubiese corregido el problema el cartucho hubiera pintado una raya más larga y sólida en el papel desechable al final del vídeo, pero en su lugar pinto una línea discontinua, señal de que la falla persiste.

Now you need to learn how to take care about water, not to waist it, not to contaminate it.

Super! Thank you very much!

Thank you for this tutorial

hi can I use pigment ink on 745s and 746s? on the official website the specs of this cartridge says it is Type : Pigment base. but I don't see anyone refilling it with pigment inks

Wow 176K views🥰🥰🥰 congratulations

How to clean the nozzles of a dry printer cartridge in a 3 seconds. You need to immerse the printer cartridge halfway, nozzles down, for 2 - 3 seconds in boiling water, pull it out and wipe it. Let me explain: boiling water will slightly soak the dried paint and the internal pressure will “break through” and wash the nozzles with ink that is inside. True, the cartridge will “lose” some ink. If it still won't print, it means there is no ink in it.