Unifi AP + Mikrotik Router VLAN Network

Thanks for demystifying this a bit, I have a MikroTik router and a couple of Ubiquiti APs, I'm excited to get things set up a bit better

Very clear, thank you!

thanks this way works great and easy to understand

Very nice video, i know a lot of people that have exactly the same setup, mikrotik router and ubiquiti AP so this is very useful for them. Me personally, im all in mikrotik guy haha, while ubiquiti produces great equipement im not a fan of having dedicated controler for my equipement at home...

Thanks for this nice and simple Mikrotik guide. Could you make one for setting up multiple VLANS for gusets, IOT and so on, with a Mikrotik router and managed switches from other vendors ?

Hi I have a edge router X I am trying to use the basic wizard set up one LAN Internet connection on Vlan . How do I get the Internet just one one of my port with the Vlan?

I got this all work! - The only problem with mine is that the VLAN don't have internet access..

how to setup vlan bridge when we have multiple vlan in one port?

For some reason when I choose tagged vlan on Mikrotik and set vlan in my TP-Link Omada AP it does not give an IP. With a hybrid port it works.

you have been the one i have been looking for:face-purple-crying: your explanations are very clear but I need more help. So I have a USW-PRO-24 ports-POE switch, Hikvision NVR, 22 IP cameras, Unifi Access points and a Mikrotik router. the NVR has 16 POE ports, so i connected the remaining cameras to the switch in a VLAN i created. I also want to configure HOTSPOT feature on the mikrotik router. How would i do this such that it won't affect remote viewing for the cameras?

Your video is very good, very well explained, but I can't get it to work, in my case. I have a mikrotik HAP Ax3 and a Unifi U7-pro, I have followed its configuration to the letter, All the Vlans give me IP perfectly, but they do not go to the Internet. Any advice.? Thanks in Advance

Great video Dan. I've followed the instructions to the letter and I'm not getting DHCP through to devices on the network. Anything I should try?

So I've got few vlans like: home, smarthome, guests with DHCP servers and firewall rules configured. With that unifi I can connect it through lets say port 4(ether4) to mikrotik and create 3 wifi networks matching vlans, DHCP and firewall rules from mikrotik?

What if we have a wireless network by default already.....can we apply vlan on existing network

What if your Unifi is plug into a cisco POE switch, how do you go about that?

Thanks for the video. I followed the steps and my computer gets assigned an IP address within the VLAN range. Unfortunately, I am not able to access the internet. Any quick advice on what might be wrong? DNS? Firewall rule? Mangle rule (I have three internet sources)? I also assumed I should tag both Ethernet ports that the two APs are connected two - plus the local bridge.

Thanks for this. I've got it "working," but I find that when I enable vlan filtering a default vlan 1 gets created by Mikrotik and I'm not sure why.

Subnet:VLAN is 1:1?

I was never able to enable Legacy interface - very annoying

This is exactly why you should stay with only one system, if you go Unifi make all Unifi, if you go Omada make all Omada, unless you do this for a living or you are a Network hobbits don't go on the rabbit hole of logging in in 3 or 4 GUIs juts to create a VLAN or to make any kind of maintenance on yours network, the amount of time you will lose in tasks that should be just simple is not worthy, for 99% of the people staying with only ONE system regardless the brand will be always better.Again, I'm not talking for those who do this for a living or are Networking hobbyists, thank you for sharing the video.