IMPROVE Your 3D Resin Prints by Watching This Video
2,597
Published 2022-01-16
My NEW Patreon Link www.patreon.com/creativecollector
Check out some of the items I used in making this plus my other models. Use these special links at no extra cost to you, plus they help my channel out.
Linant Base 3D Printer ------ amzn.to/3F4pljZ
Anycubic Photon Mono X ----amzn.to/3yEbo9R
Elegoo Standard Grey Resin ------- amzn.to/3fQ9bky
Mr. Hobby GTool ------ amzn.to/3xBlyqs
Elegoo Saturn Printer -------amzn.to/3fNVQcs
Creality Ender 3Pro-----amzn.to/3CvcSFX
Plastic razor Blades ----amzn.to/3xF5lAy
Silicone Slap Mat ------- amzn.to/2VACh0p
Master Airbrush --------amzn.to/3s8dV9Z
Hatchbox PLA filament------- amzn.to/3lVzcm7
Elegoo Washable Grey Resin ----amzn.to/3CEmeyW
Elegoo Wash N Cure Station ----amzn.to/3CB1YOJ
Paper Strainers 50ct.------- amzn.to/3jMq28X
Vallejo Liquid Mask-----amzn.to/2ZkHHhI
Army Painter Wet Pallette----amzn.to/3FJFN9P
10 pc Detail Paint Brush Set---amzn.to/3r7KgPD
Aves Apoxy Sculpting Clay---amzn.to/3tIrM9H
#3dprint #resinprinter #statues
All Comments (13)
-
Sorry guys! Had a little audio problem.
-
I use a dirty wash before putting my prints into my cleaner. Just a jug with a sealed lid that I toss em in and shake the crap out of it. I don't worry about this alcohol getting as dirty and it keeps the larger amount in my wash machine cleaner for longer. The wash machine is basically just getting the small details clean.
-
Great tips. Some are easily missed
-
Tks 4 the tips!!!
-
Great video man this gave me some extra tips and ideas and I've been resin printing for a bit
-
Great tips. Thanks for the video
-
Good stuff!
-
Great tips for a beginner, thanks!
-
Some good tips in general, I’m sure it will help beginners and possibly some veterans to the hobby 👍🏼
-
decent tips all round. im interested in the water-washable resins, i figure it will save on alcohol. are there any pitfalls specific to water-wash resins that you know of?
-
What sort of grease do you use please?
-
Being totally new to resin, are you able to make different parts of a printed model different thicknesses? So for example, on those Wicked models, if you wanted the leg peg part to priint solid, can you make it do that but the rest of the model prints hollow? I know I can do this in CURA for FDM with per model settings.