Does Vibration Work? Let's Find Out!
22,981
Published 2021-09-10
I also demonstrate why vibration is useless against the biggest source of bubbles: resin foaming.
Here is a list of suppliers for the rubber, resins and waxes I use in my videos:
www.dropbox.com/s/kz6mhmf7v5vpy7l/Material%20and%2…
Do you have a project to suggest for the channel?
Here’s a .pdf with everything you need to know:
www.dropbox.com/s/pjb0l6fr7zjttec/YouTube%20Collab…
All Comments (21)
-
Vibrating or knocking is a left over technique from plaster mould making, somehow it has found its way into Silicone mould making.
-
Great video! You consistently test theories that bounce around in makers heads and show all of the processes and even throw in variables. Love every single one of your videos!
-
You do make me chuckle Robert. I love your sense of humour, and your sense of fun during your experiments. I'm not a model maker but I always drop by to see what you are doing.
-
Mastering the process thru experience and sharing your knowledge is gold!
-
Well informed and on the topic I've been waiting to see. Good work.
-
Thanks for sharing Robert, I'm glad I finally saw this hashed out in a video.
-
This is such an awesome channel! Thanks for sharing your knowledge.
-
When pouring it on a vibrator you normally pour at an angle and tilt, and do so quite slowly. That said, that's for pouring yellow gypsum into dental alginate. For a dental model.
-
this is cooool a direct response to ours comments. hugs Robert!!!
-
High pours have been the only solution i have found that eliminate bubbles...if not using a pressure pot/vaccum chamber
-
Thanks for this, I just bought a gallon set of resin. I wasn't sure how to keep the foaming down but this makes a lot of sense. Thank you for de-mystifying resin casting. Love your stuff!
-
I just found your channel and subscribed! I love these videos. Thank you!
-
Excellent! Thank you so much! I degas. Then vibrate to aid the resin to travel through out the mold faster. I then put it in my pressure pot.
-
You are quite a gem. I love your very interesting videos. Thank you!
-
Thanks for the test Robert! Guess that answers that.
-
okay, this answers my previous question - as per your heading. need to get me one of those pressure tanks
-
I de-gas my silicone AND use a fibrating table when I make silicone block molds. Works like a charm!
-
What definitive results! Like others, I'd love to see a similar test with the classic talcum powder dusting.
-
You proofed withou any daubt what in theory might be knowldge. Very well done aus usual
-
Top tip thank you