3D Resin Printing Lychee Slicer Lychee Slicer Update version 6.0.2
2,177
Published 2024-05-23
For more videos like this, check out our Fully Supported Series.
#fyp #3dprinting #3ddesign #3dprintingtutorial #teaching #tutorial
Links to all our creators that we work with or just plain think are awesome.
Gaz Minis
www.patreon.com/GazMinis
Digital Dark
www.patreon.com/digital_dark_pinups/
Exclusive 3D
www.exclusive3dprint.com/
Crippled God Foundry
www.patreon.com/crippledgodfoundry
Officer Rhu
www.patreon.com/Officer_Rhu
Printed Obsession
www.patreon.com/printedobsession
Witchsong Miniatures
www.myminifactory.com/users/WitchsongMiniatures
#teaching #tutorial #3dprintingtutorial #3dprinting
This tutorial assumes you have some experience with Lychee or other slicers.
Change Log
mango3d.io/change-log-lychee-slicer/
Thanks for watching.
My NEWEST Lychee Settings
Super Light and Light supports
1.10 - 1.22 bar diameter
0.10 - 0.22 tip diameter
3.10 - 3.55 tip length
raft - line/support triangle, or shape
bottom thickness on supports .30 - .25 - .45, raft is .50 (varies based on object mass)
Mediums on 1/24 scale or higher only
1.33 - 1.44 bar diameter
0.33 - 0.44 tip diameter
3.33 - 3.55 tip length
raft - line/support triangle, or shape
bottom thickness on supports .45 - .50 - .55, raft is .60 (varies based on object mass)
Heavy on terrain and heavy parts only
1.55 - 1.77 bar diameter
0.55 - 0.77 tip diameter
3.55 - 3.77 tip length
raft - line/support triangle, or shape
bottom thickness on supports .50, raft is .70 (varies based on object mass)
Happy printing!
Check us out on Instagram too:
www.instagram.com/printmy3dmini/
printmymini.store/ - Shop Buy physical prints!
printmymini.com/ - Hire us for pre-supporting, teaching, training and more!
All Comments (2)
-
Thanks for the video. I just upgraded to this version. With that said do you think the auto support is good enough for successful prints than in the past? If you still add supports after the auto supports what percentage do you add? 10? 20? 30%? Sub'd and liked.
