Rigid Pipe Threading

The pipe doesn't have to be so close to the chuck, he really came close to the chuck.

The "reamer" is used before cutting the thread, not after, it's not a de-burring tool

Great Class Thank you!

My boss had the cleanest crew on any job site. That baby was my responsibility. One day to the next I was pushing atleast 160 pipes. Great times!

GREAT CLASS THANK YOU VERY MUCH

excelente yo tengo una Compacta Modelo 300 y funciona a la perfección es una maquina muy buena

Thank you for sharing

great video men ! thanks

Thanks for the video, was wondering how these things worked. One word of caution, be careful with lanyards and rotating equipment, I've seen that end not so well.

Awesome video, thank you.

So cool and awesome never have a seen a 300

Geez, never have I seen a clean 300

Hey buddy. I'm one of your past theory students. I just got my license within the last year. just as the school was getting locked down. You're actually scheduled to be my theory teacher for advance. But you had to take a personal break from work. anyways I just wanted to let you know that this video helped me kick ass today at work. It looked like I was a pro. I didn't tell anybody that I pre-watched your training video on pipe threading. This video was perfect on reminding me how to do it. Thank you for all the little tips. Wishing you all the best thanks for your help . Kevin Lester

The one I use at work has an oil tray underneath the threading tool... And it's attached to the machine.

Where can I download the table when checking the thread length (at 17:37)? If not, what is the recommended number of turns of thread for each die size (when checking the thread without using ring gauges)? I'm interested in size of: 3/4" = number of turns? 1" = number of turns? 1-1/4" = number of turns? 1-1/2" = number of turns?

amazing

Thanks for the informative video. There’s a few things I’d like to toss in here. It’s not uncommon working with black steel pipe that it will come in 10’6” lengths, might make a difference in the back of a van or inside an elevator. Depending on the diameter size of the pipe, you can work with a nipple about 7+ inches long, careful if using a hand stock, just make sure it doesn’t get jammed up on the jaws or it could crack the face of the machine. Some people are shy with the oil, but more oil is less smoke and the machine doesn’t need to work as hard. And if you are a plumber, you could get away with not reaming certain types of pipe; like gas because it has very little pressure and there is no turbulence inside the pipe.

Really a useful Video...The tolerances (16.3 - 19.8 mm ) what you have specified as per Table 40 is that applicable for all the sizes? how long will 1" dia will take to thread & what are the consumables say oil. the length 18" what you said is that the min length is it ? for the estimation purpose what should i consider, can you pls guide me.

Thats a great tool I wanna buy one. Great video too thanks

Hi what if we want to thread the Al pipes? is it the same exact tool and process?