Bicycle maintenance. How to lubricate the bicycle
239,130
Published 2023-09-02
How often do you change the grease in the wheel hubs of your mtb bike?
Cyclists often don't realize that you need to change the grease every 2000 - 3000 km.
It is necessary to disassemble the bicycle wheel hubs in order to detect internal damage on the cone nuts and bulk bearings.
If the bearing is not replaced in time, it can damage the inside of the wheel hub.
Today we will be disassembling a common hub design on bulk bearings.
We will clean and change the oil.
Video with no spoken words, featuring only technical noises. Language barriers are irrelevant; follows a DIY video style.
This video is for people who are passionate about bicycles.
00:00 Bicycle maintenance.
01:02 Removing the center-lock brake rotor.
01:34 Removing the bicycle cassette.
02:19 Opening the rear bicycle wheel hub.
03:28 Cleaning the hub axle and cone.
04:55 Cleaning the bearing balls.
06:14 Removing the bicycle hub seals.
07:10 Cleaning the inner surfaces of the bicycle hub.
07:44 Securing the cone and nut on the bicycle hub axle.
08:30 Reinserting the bearing balls into the bicycles hub.
09:07 How to lubricate the bicycle.
09:40 Installing the locknut and axle into the bicycles hub.
11:45 Adjusting the bicycle hub.
#bicycle #bicyclehub #bikeservice
🆗🎥🚲
Write in the comments, what you would like me to do in the new video.
❓❔❓
Ask your questions in the comments
All Comments (21)
-
If you liked this video, share this video with your friends ❤ it will help the development of the channel! 📈 Thank you for your comment! 😍
-
Sehr gute Kamera Führung, man schaut dem Meister über die Schulter und lernt. Sehr schön.
-
Ferramenta é a arte do profissional.
-
Dźwięk kluczy jest jak muzyka dla pięknej, tańczącej, skompo ubranej niewiasty.
-
Good job servicing the hub. I especially liked how you adjusted the bearings at the end. Thats the proper way to do the adjustment of a QR hub. A couple comments: it's better to clean the hub's cups without removing the dust covers. Yes it'll be trickier but you avoid damaging the dust covers. Also, you might consider replacing the bearing balls instead of cleaning them. They are cheap enough.
-
Superbe video , dont j'avais bien besoin , ayant quasiment le même montage merci beaucoup 👍
-
Parabéns. Gostei muito desse vídeo. Bem visível a demonstração. Forte abraço. Sergio. Cidade Sapucaia do Sul - Brasil.
-
I enjoyed the good video. I am curious about disassembling and assembling the hub sealed bearing. Thank you.
-
I despise those Shimano hubs with the entirety of my soul. Every single rainy ride i had to service it 🙄🙄 You did a really neat job :)
-
Its already at the stage of breaking out the hub, have a check and maintenance for every 4 to 6 months depending on how often you ride on your bike.. always clean your bike after long ride..
-
Ładnie pokazane, a co za smar wyciskamy ?
-
I love it. short and silence.
-
Fazer uso do imã pra remover as esferas , muito bom .
-
Fucking excellent! This video is about exactly what I wanted. Thank you so much for uploading this video.
-
Boa tarde video com ótima ilustração de fácil entendimento , não para não achei top .
-
olá. obrigado pelo vídeo. fez ótimo trabalho. bom amigo, por gentileza, se você souber. eu gostaria de saber quantos "mm" tem a passagem da agulha que você usa na seringa? "diâmetro interno".
-
Мені подобається це.
-
Thanks!
-
OK, Bruder, wunderbares Video, Daumen richtig hoch. Hab alles so vorgefunden, wie von Dir beschrieben, nur viel dreckiger. Deswegen muss ich ja ran. Mein Problem ist aber noch eins: Mein Freilauf klemmt und ich krieg ihn nicht runter. Kennst du da einen Trick? Gibt es einen Abzieher? Gruß, Börny
-
Boa noite, ótimo trabalho! vc teria esses vedantes para venda? estou a procura de vedantes que sirvam em um cubo traseiro shimano claris center lock.
