Few people know the secret of the old shower hose! Incredible
Published 2024-07-28
1. Gather all the necessary materials: an old shower hose, two plastic funnels, a lamp socket, two meters of wire, a male socket, an on and off button, an LED lamp and a kilo of quick plaster. 2. Clean the shower hose thoroughly, making sure to remove any dirt or residue. 3. Decide where the base of your lamp will be and position one of the funnels in that area. This funnel will be the base of the lamp, providing stability. 4. Attach the funnel to the shower hose using glue or some other method of your choice. Make sure it is securely fastened. 5. Then, take the second funnel and make a hole in the center to accommodate the lamp nozzle. Make sure the hole size is adequate to fit the nozzle firmly. 6. Fit the lamp nozzle into the funnel hole and secure it in place using glue or another suitable method. 7. Now run the wire through the shower hose, making sure to leave enough wire at the ends to make electrical connections later. 8. On the end of the wire that will be inside the lamp, connect the wire to the lamp socket following the socket manufacturer's instructions. Generally, this involves attaching the wire to the nozzle terminals and tightening them properly. 9. At the other end of the wire, connect it to the male socket. Again, follow the manufacturer's instructions to make this connection properly. 10. Before completing assembly, check the electrical connections to ensure everything is correctly connected and secure. If necessary, consult a professional to help with this step. 11. Now, let's create the base. Mix the quick plaster according to the manufacturer's instructions and pour it into the base of the lamp where the funnel is attached. Be sure to level the plaster and allow it to dry completely before proceeding. 12. After the plaster dries, you can personalize your lamp by painting it, adding decorations or any other finish you prefer. 13. Finally, connect the LED lamp to the lamp socket, using the manufacturer's instructions. Connect the socket to the mains and test your new luminaire. Always remember to take safety precautions during the process, such as turning off the power before working with electricity. If you have any questions throughout the process, don't hesitate to ask a professional or electrical specialist for help.
#diy #recycle #faça
All Comments (4)
